Common questions

How do I use Google assistant with ESP8266?

by Author

How do I use Google assistant with ESP8266?

To activate them, go to the My Applets page on the main IFTTT site, click on the applet card, and click set the on-off toggle switch to “On”. If you haven’t already, IFTTT will ask to connect to your Adafruit IO and Google Assistant accounts. Allow the accounts to be linked, then turn on the second applet as well.

How do you use ESP8266 AT commands?

If the AT start up is successful, then the response is OK. This command can be used to restart (reset) the ESP8266 WiFi Module. This command is used to check the version information of the firmware and SDK….Basic ESP8266 AT Commands.

Command Response
AT+GMR OK

How do I connect NodeMCU to Google home?

Connect Ground Pin of Relay with Ground Pin of NodeMCU. Connect VCC of the relay module with a 5v power supply. If the relay module is 3v, then connect VCC with NodeMCU 3.3v (No need for extra power supply). Power up both Nodemcu and Realy module with 5v power supply.

READ:   Why is Harvard Square famous?

Does Tasmota work with Google Home?

You now need to create a device in the gBridge account panel that is going to be shown in your Google Home app. Click on the „Add Device“ button there, give a name you’d like Google to listen to. Use „stat/{tasmota-mqtt-name}/POWER“ as the „Status topic“.

What is Google Assistant API?

The Google Assistant Service exposes a low level API that lets you directly manipulate the audio bytes of an Assistant request and response. Bindings for this API can be generated for languages like Node.

What can I do with ESP8266?

ESP8266 Applications

  • Smart security devices, including surveillance cameras and smart locks.
  • Smart energy devices, including HVACs and thermostats.
  • Smart industrial devices, including Programmable Logic Controllers (PLCs)
  • Smart medical devices, including wearable health monitors.

What does AT command stand for?

ATtention
AT commands are instructions used to control a modem. AT is the abbreviation of ATtention. Every command line starts with “AT” or “at”. That’s why modem commands are called AT commands. Note that the starting “AT” is the prefix that informs the modem about the start of a command line.

How do you send commands to HC 05?

For HC05: Type “AT” (without the quotes) on the serial monitor and press enter. if “OK” appears then everything is all right and the module is ready to take command. Now you can change the name of the module, retrieve address or version or even reset to factory settings. To see the default name, type AT+NAME.

READ:   Can I import iPad from USA to India?

How do I connect my Tasmota to Google Home?

You now need to create a device in the gBridge account panel that is going to be shown in your Google Home app. Click on the „Add Device“ button there, give a name you’d like Google to listen to. Select „Switch“ or „Outlet“ as the device type, while only selecting „On and Off“ as the supported trait.

Does Tasmota work with Homekit?

11 homebridge-mqttthing supports the following Homekit device types: Light bulb. Switch. Outlet.

How do I enable Google Assistant API?

Enable and disable APIs

  1. Go to the API Console.
  2. From the projects list, select a project or create a new one.
  3. If the APIs & services page isn’t already open, open the console left side menu and select APIs & services, and then select Library.
  4. Click the API you want to enable.
  5. Click ENABLE.

How does Google Home work with ESP8266?

Google Home accepts commands that are send to IFTTT and that sends a command to the ESP8266. I wrote my project in just 7 lines of Basic. Then I extended it to use 6 I/O ports instead of just 1. This means it is capable of triggering relays or transistors for switching lights, pumps, sprinklers, ledstrips etc.

READ:   Does adding mirrors to a room make it brighter?

How to connect esp866 with Google Assistant?

To connect Google Assistant, you can follow the guide available in gBridge documentation: https://doc.gbridge.io/firstSteps/gettingStarted.html The Adafruit MQTT library will be used to communication between the ESP866 and gBridge.io Enter informations in the first part of the code and upload it. You shoud be up and running.

How to create a gas/esp8266 spreadsheet?

Now, Let’s getting started ! Step 1: Logging into your google drive, create a new Blank Spreadsheet then rename it such as ArdunioPost Step 2: Enter some information into header row, such as: time, temperature, humidity. (Note: This header row very important for GAS and ESP8266 coding) then select Tools/Script editor…

Is there an HTTP API for ESP8266?

If you are a maker and you use ESP8266 on your home devices (and if you are reading this blog chances are you are) you know some open source firmwares for ESP8266-based smart switches/sensors do have an HTTP API. And ESPurna does have. Of course, you can also build your own firmware or use an REST library like aRest.io.