How high can a 1/2 HP pump lift water?

A two-line jet pump can typically raise water from depths of 30-feet to 80-feet, and at water delivery rates of 4 gpm (gallons per minute) (for a 1/2 hp 2-line jet pump serving an 80 foot deep well) to 16 gpm (for a 1 hp 2-line jet pump serving a 30 foot deep well).

How far will a 1/2 HP sump pump push water?

A 1/2 HP sump pump can handle 7 to 10 feet vertical lift off the sump pump, a 90-degree elbow and a horizontal pipe running between 3 and 25 feet.

How far can a 2 inch pump push water?

This lightweight and portable transfer pump has a maximum delivery volume of 158 gallons per minute and is capable of passing solid waste up to 9/16 inch in diameter. With a 2-inch NPT inlet and NPT 2-inch outlet, this unit has a total head of 98 feet and a suction head of 26 feet.

Which water pump is best for 60 feet height?

4) Kirloskar Monoblock Water Pump Chhotu As the saying goes, ‘Good things come in small packages’, This monoblock water pump is one of the smallest in size amongst the 0.5 hp pumps but it is very powerful. It can lift water from 20 feet depth & lift it up to a height of 60 feet.

How high can a sump pump push water?

For most average-sized homes in areas with average water tables, a 1/3 HP sump pump should be sufficient. Typically, 1/3 HP pumps can handle 7′ – 10′ vertical lifts from the sump pit if they have one 90-degree elbow and a horizontal pipe run between 3 feet and 25 feet.

How high can a 1HP pump lift water?

3) Self Priming Monoblock Water Pump 1HP This self-priming monoblock pump can lift water from 25 feet depth & can lift water up to 100 feet height. This means it is the strongest 1 H.P. (Horsepower) pump available in this price range of Rs 3000 in the market.

How far can a pump push water vertically?

Pumps are limited to about 32 feet of suction head. This is the limit for atmosheric pressure to push water vertically. So, pumps must be located within 32 ft.

Is 1 2 HP sump pump enough?

There is no “correct” size. The horsepower requirement for a house is determined by the area of drainage connected to the sump, the depth to groundwater, the depth of the basement and many other factors. A 1/3 horsepower (hp) pump is satisfactory for most houses, but a 1/2 hp pump doesn’t cost that much more.

How far can a 1/2 HP pump push water up hill?

A 1/2 Hp pump should be able to push water up hill 40 ft without problems. The distance it pumps is somewhat irrelevant. The more important question is how deep the well is. If the well is shallow then a pump is able to suck water up the well pipe.

How deep can a 2 line jet pump pump go?

A two-line jet pump can typically raise water from depths of 30-feet to 80-feet, and at water delivery rates of 4 gpm (gallons per minute) (for a 1/2 hp 2-line jet pump serving an 80 foot deep well) to 16 gpm (for a 1 hp 2-line jet pump serving a 30 foot deep well).

How far will a 10 GPM water pump push?

It will push more than 150 ft. The issue is, what is the flow rate? There will be about 5 psi pressure drop in 150 ft of 1″ pipe at 10 GPM. As the pressure increases, the flow will drop off and the pressure drop will become insignificant. If the house is a lot HIGHER than the pump, then it matters more.

How much water can a 1/2 HP raise?

We know (by definition) that 1/2 horsepower can raise 16500 lbs. of water (1978 gallons) 1 foot in one minute. Therefor, it could raise 1 gallon to 1978 feet in one minute or 1 qt. could be raised to 7912 feet in 1 minute. Water exerts a pressure of 0. 433 lbs. per foot of elevation.