What happens if I use a 12V adapter on a 5V device?

The device will very likely burn out. In addition, depending on what the device is and the capacity of the 12V supply, connecting a 12V supply to a device rated 5V max could lead to a hazard – fire, explosion, etc. Mostly it will get damaged.

Can I use 5V adapter for 12V router?

A 5V adaptor cannot drive a 12V device. Also, an adaptor of voltage higher than the device needed would damage your device.

Are all 12V adapters the same?

The short version: Voltage (V) should always be the same for both adapter and device. Polarity (plus on the left side or plus on the right side) should always be the same for both adapter and device. Current (A or mA) of the adapter should not be lower than the current of the device but may be higher.

Does 12V damage 9V?

If you have a 12V adapter, you might wonder whether you can use it to power your 9V guitar pedals. In most cases, you cannot use a 12V adapter to power a 9V guitar pedal. Using a 12V adapter on a pedal designed to only handle 9V can completely destroy it. Those pedals will work perfectly fine with a 12V adapter.

Can I use a 12V 0.5 A adapter with a 12V 1A power rated modem?

Yes. An adapter will need to be providing the same voltage as the television.

Can I use different power adapters?

As long as the voltage is the same on the adapter and on the device (also, I have 9V DC and 9V AC adapters, do not mix these up) and be sure the current required is less than the amount that the adapter can source otherwise you risk overloading the power supply.

Can you connect two adapters together?

No, you should not connect two adapters in parallel. If there is any unbalance at all there will be current from one to the other and you will not get the increased current. No two adapters will have exactly the same voltage output, the higher voltage unit will provide more current than the one making a millivolt less.

Can I connect two power supplies together?

Two or more power supplies can be connected to supply higher voltages or current. The simplest method to create higher voltage is to connect the power supplies in series, set each supply to output the same voltage and each supply should have the same current limit.

Can I use a 5V 2A charger with a 5V 3A device?

Yes, it is absolutely safe to charge a device with a charger that has more current capacity than needed. Since the voltage is held constant (5V), the only factor that determines current draw is the load (another term for resistance) the device places on the charger.

Can I use 12V for 10v?

No it’s not safe for the most of cases. There are two reasons. Since newer adapter has more terminal voltage therefore device is liable to draw more current and bad thing is that newer adapter is ready to provide more current.

https://www.youtube.com/watch?v=ewTthSwcmMs