What is the IS code of LPG?

73110010
73110010 – Containers for compressed or liquefied gas, of iron or steel: Liquefied petroleum gas (LPG) cylinder HS Code and Indian Harmonised System Code.

What is mastic flooring for LPG godown?

Mastic Flooring For LPG Gas Godowns – ASB Enterprises. Mastic flooring is commonly used on vertical areas and walls in acid-proof padding. Mastic floorings completely eliminate mesh reinforcement for lining purposes by providing a hard wearing and durable surface.

What is LPG Odour?

Ethyl Mercaptan is what makes propane gas smell. It’s an additive that is combined with liquified petroleum gas, or LPG, to alert users of a leak.

Is LPG heavier or lighter than air?

LPG is heavier than air, unlike natural gas, and thus will flow along floors and tend to settle in low spots, such as basements. There are two main dangers to this. The first is a possible explosion if the mixture of LPG and air is within the explosive limits and there is an ignition source.

How do you store LPG cylinders?

Cylinders should be stored preferably in the open air on a concrete or load-bearing surface. Flammable liquids, combustible, corrosive, oxidising materials, toxic materials or compressed gas cylinders should be kept separate from LPG containers in general. Containers should be stored with their valves uppermost.

How many kg LPG gas can be stored without license?

100 kg
Though storing 100 kg of LPG does not require storage license, the product category per say needs to be included in the CCOE license.

In what sizes do govt oil companies supply LPG cylinder?

(2) The supply of liquefied petroleum gas to domestic category consumers shall be made in 14.2 Kg capacity cylinder and to those falling under non-domestic category shall be made in 19 Kg/47.5 capacity cylinder, or in such capacity cylinders as may be notified, by the Central Government from time to time.

How much should I invest in gas agency?

Investment for Indane gas Agency : Vehicle. Security Fee around 2 -3 lakhs and you should have two lakh in bank account. Minimum cost 40 lakhs.

Which type of floor is suitable for godown?

Industrial flooring is the best type of floor for your warehouse due to its durability, reliability, resistance to heavy loads and even hygiene.

What is the minimum distance between LPG godowns?

Depending upon the storage capacity of the LPG godown, a certain minimum open distance is prescribed to be maintained on all sides of the godown e.g. it may be 5, 7 or 9 meters etc. A boundary wall is required to be constructed at prescribed distance to ensure that the requisite safety distance is maintained at all times.

What is the minimum distance from a power line to house?

2 The VERTICAL distance is at least 4 m. No matter what the situation, if you estimate by eye that the distance is close to the minimum required, never try to measure it more accurately by placing anything at all near the line. There must be a minimum HORIZONTAL distance of 1.6 m between any part of a building and the closest low-voltage line.

How close can a 440kV power transmission line be to a building?

As per these regulations, a 440KV power transmission line which passes at 7.4 metre vertical height and 5.7 metre horizontal distance from a building is within limits. That however is absurd. 3.

What is the minimum distance between low voltage lines?

Approach distance from LOW-voltage lines. There must be a minimum HORIZONTAL distance of 1.6 m between any part of a building and the closest low-voltage line. This applies to all configurations of low-voltage lines.