What size motor is good for a 16 foot fiberglass boat?

It can have a range of 50-300 horsepower motors for maximal efficiency. This range already considers the boat’s size and usage. For a standard 16-foot aluminum boat, a 60 horsepower motor will suffice. On average, it can have a speed of about 25-30 miles per hour.

What size motor can I put on a 16 foot boat?

To achieve maximum efficiency, you’ll have to give it 50 to 300 horsepower. There’s a range of the required power as you take into consideration the size and usage. An aluminum boat that is 16 feet long needs to have a 60 horsepower motor.

What is the biggest motor you can put on a 16 foot boat?

You can’t legally put anything larger than that on your boat. A 16′ fiberglass boat will prob need at least a 50 hp outboard, just to get you up on plane, and you probably be able to go up to a 115hp or so. If fishing is ALL you want to do you could go small like a trolling motor.

What size outboard can I put on my boat?

Tips for selecting the right size hp for portable outboard motor for your boat.

Motor HP	Boat length (feet)	Boat length (metres)
9hp – 20hp	11′ – 16′	up to 4.5m
20hp – 40hp	13′ – 18′	up to 5.0m
40hp – 75hp	14′ – 20′	up to 5.5m
90hp – 140hp	16′ – 25′	up to 6m +

What happens if motor is too big for boat?

If one were to put a larger than rated motor on the boat there would be pressure and stresses applied that may be over the acceptable range for the boat and serious damage could occur.

How fast does a 40hp boat motor go?

A 40hp Pontoon boat with an average load of people can expect to reach speeds of around 10 – 15 mph.

How fast will a 150 hp bass boat go?

fiberglass bass boat powered by a 150-hp outboard will have a WOT speed in the 50-mph range, and will have its most economical cruise in the mid-30s with two people aboard.

How much does a Mercury 60 hp 4 stroke cost?

$8,495.00. In Stock – Brand New 60 Hp Mercury 4-Stroke Command Thrust outboard motor. Includes Electronic Fuel Injection (EFI) plus Power Tilt & Trim. Command Thrust Lower Unit is geared for greater thrust.

What size motor do I need for a 14 foot boat?

Typical horsepower for a 14-foot jon boat would be between 15 HP and 20 HP although up to 25 HP is not uncommon either. 20 HP can comfortably give you a top speed of 20mph, potentially even stretching to 25mph depending on weather conditions and the weight on the boat.

What size motor can I put on a 14 foot aluminum boat?

For example, you can easily find that one particular 14′ foot Jon boat can take a 20 hp outboard motor while a different 14′ model can only handle a 15 hp, even though they are both made by the same manufacturer!

Can you put a bigger motor than recommended on a boat?

Exceeding any capacities on the plate can result in safety fines by the Coast Guard. So unless you like to push your legal liability limits, keep the outboard size within those recommendations. For powerboats bigger than 20 feet the answer to, “how big an outboard can my boat handle?” is not so straightforward.

Can I put a bigger motor on my boat than it’s rated for?

Putting a larger engine on the boat than whats its rated for – Outdoor Gear Forum | In-Depth Outdoors.

What size motor do I need for a 12 foot boat?

15hp – 25 hp (Weight abround 36 kg-52 kg) These motors can be heavy to handle but are still considered to be a ‘small’ outboard motor. This hp range is quite popular for use with inflatable boats 10-14ft, aluminium fishing boats 12-16ft, flat bottom boats 12-16ft in length, fibreglass boats 12-16ft in length.

What size engine do I need for a fiberglass boat?

A single 115 to 150-hp engine can produce a reasonable performance for an entry-level fiberglass sportboat from 17′-19′, depending on the load. With it, a powerboat in this range can have a top speed from 40 to 45 mph, with cruising speeds in the mid-20s. Four Winns HD 270 OB. Consumer Caveat: Be careful not to overpower a small boat of any type.

What is the largest outboard motor on a 16 foot boat?

Theirs a reason why manufactures have outboard limits on their boats. Typically a 35hp would be the largest “I” would suggest on a 16ft, but all that info is on the transum of your boat. Weight limit, max outboard size recomended. My 2004 Mercury 25hp long shaft weight is 118 lbs. Be safer to go with a 25hp motor.

What size engine do I need for my sportboat?

When selecting power for a sportboat perhaps the most important thing to avoid is under-powering the boat. Some boat builders and dealers typically will install 3.0L 135-hp engines in the smallest sportboats to keep the total price of the boat as low as possible.