Blog

Can Dent be removed from scooty?

by Author

Can Dent be removed from scooty?

To begin with, all you need to do is pour a lot of hot water around the dented area. As you know, metals and plastics expand on heating. This hot water will enable the particles of the dented area to expand. Pulling the dented area out with a plunger immediately will get the dented area out and back to normal.

How much does it cost to repaint Activa?

sam: cost involved depends on your scheme and features (metallic, with/without glitter, carbon fibre finish, matte, etc etc), but keep a budget between 4-10k.

How do I claim insurance on Activa 5G?

Here is the process of reimbursement bike insurance claim for your Activa 5G bike:

  1. Inform your insurance company about the mishap and register your claim.
  2. Take your insured bike to any garage or workshop of your choice for repair.
  3. A surveyor will be sent by your insurer at the garage to access the damage extent.
READ:   What are 10 different stretches?

Can we paint Honda Activa?

Have you used this product?…Just Spray HONDA ACTIVA / MARUTI SUZUKI SHINE WHITE Spray Paint 400 ml (Pack of 1)

Brand Just Spray
Applicable on Honda activa, TVS, Hero Honda
Finish Gloss
Flammable No
Recoat Time 10 min

How can I paint my scooter at home?

Here’s the before photos.

  1. Wash every part you will paint and then wipe it down with wax and grease remove.
  2. Tape off anything that you don’t want to paint.
  3. Sand any scratches.
  4. Use body filler if you need it.
  5. Final sand (the smoother the prep work the better the paint finish)
  6. Clean off any sanding dust.
  7. Paint the primer.

What is the cost of Activa Insurance?

Avail Honda Activa Insurance starting from ₹752 only. Don’t know Registration number?

How do I claim insurance on Activa?

Below are the documents you will need to file a claim on your Honda Activa insurance policy:

  1. Duly filled claim form.
  2. Policy document.
  3. Registration Certificate (RC) of the vehicle.
  4. Driving license of the person who was riding at the time of accident.
  5. Copy of FIR in case of theft.
  6. Repair invoices and bills (for reimbursement)
READ:   Can dogs see your future?

Can you push a dent out from the inside?

If your dent is in a plastic surface like a front or rear bumper cover and you can get to its inside surface, you can pour boiling water over the area to soften it up, then push the dent out from the inside. If you can’t access the dent from the inside, try using a hair dryer to warm up and expand the outer surface.

Can we remove dent from bike tank?

In theory, you get some sort of air bag such as an inner tube to a small tire or a blood pressure cuff and stuff it inside the tank behind where the dent is. As you slowly inflate the tube, the pressure should work against the dent and pop it back into it’s original position because of the memory of the metal.