Can you have wood floor in front of fireplace?

If you install a gas fireplace, no chimney, only a vent, it is considered an appliance not a real fireplace, so wood floor can go right up to the base… Hearth extension shall extend at least 16 inches in front of, and 8 inches beyond each side of the fireplace opening.

How do you install hardwood flooring around a fireplace?

Laying hardwood flooring is relatively simple. You place the boards on the subfloor, fit the tongue-and-groove ends together, tap them to fit snugly and pin them to the subfloor with a staple nailer. However, simplicity goes out the window when you reach an obstacle such as a fireplace.

What is acceptable gap in hardwood floor installation?

Generally speaking, gaps in a wood floor are normal for boards up to 2¼ inches wide if the gaps close during more humid times of the year. Normal gaps can vary in width, ranging from hairline gaps to the thickness of a quarter.

How much space do you need around hardwood floors?

As already stated, you need to leave between 10 and 15mm all around your room. Ideally, you should place a range of suitably sized spacers against the wall you’re fitting against as well as against the two walls where the floor will run. This way you’re sure to get the right size of gap.

What do you put on the floor in front of a fireplace?

Combustible Floors In order to install a gas fireplace you need to install a noncombustible floor made out of masonry — brick, stone or concrete — to protect both your subfloor and nearby walls.

How do you protect hardwood floors in front of fireplace?

Protecting Hardwood Floors from the Fireplace

1. Always Use a Screen or Cover. One of the most consistent ways to protect your floors is never to operate the fireplace without a screen or cover.
2. Extend the Hearth.
3. Purchase a Hearth Pad or Fireplace Rug.
4. Avoid Overly Hot Fires.

How do you install hardwood floors on a brick fireplace?

One of the best options for installing hardwood floors around a brick fireplace is to undercut the hearth (if you have a raised hearth). In order to do this you’ll need an undercut saw with a diamond tipped blade. Since most people don’t have undercut saws, you’ll probably have to rent one.

How do I keep my hardwood floors from separating?

To prevent large gaps in your wood floors, stabilize your home’s relative humidity by using a humidifier in the winter months. Use exhaust fans and dehumidifiers to prevent too much moisture in the summer months. Small gaps less than 3⁄32 inch in width can be filled with wood filler.

Should there be small gaps in new hardwood floor?

If you are doing the installation of the hardwood floors yourself, you should not leave gaps in between floorboards. Depending on the type of hardwood floor you are installing, an expansion gap may be needed around the perimeter of the floor but not in between the floorboards themselves.

Does hardwood floor need expansion gap?

It is an essential gap that must be left around the edge of the room when fitting hardwood, bamboo or laminate flooring. The expansion gap should be around the whole perimeter of the room, wherever the flooring may be against fixed objects, such as walls, doorways, radiator pipes and fireplaces.

What is the maximum floor length I can install without expansion joint?

If the room is more or less square and if there aren’t too many indoor climate changes between weekdays and the weekend or during the day, then you can lay a surface of up to 10 metres long and 8 metres wide without extra expansion joints in the floor surface.

How to install 3/4” solid hardwood flooring?

3/4” Solid Hardwood Flooring may be installed over wood sub-floors using staples or flooring cleats. When installing 3/4” solid wood planks or strips by nailing or stapling it is necessary to use the proper type of flooring stapler or nailer made for the thickness of the hardwood flooring that is being installed. Step 1

How do you calculate the amount of hardwood flooring you need?

To determine the amount of flooring you’ll need, multiply the length times the width of the room to get the square footage, then add 10 percent for waste and damaged boards. Install hardwood floors perpendicular to the floor joists, parallel to the longest wall, leaving a ¾-inch expansion gap around the perimeter.

How do you install wood floors?

Follow these instructions on the installation of wood floors. Let flooring acclimate to the room temperature and humidity for three to five days prior to installation. That’s a good time to lay the boards from several cases out on the floor and mix them up to vary the shades and lengths.

How long does it take to install hardwood floors?

Go from subfloor to breathtaking in as little as a day. Follow this guide for installing hardwood floors in your home. Hardwood floors are beautiful, last a lifetime, and are easy to install. With no special tools, you can go from subfloor to breathtaking in as little as a day.