How do you convert cubic meters of water to kilograms?

1 m3 / cu m = 1,000.00 kg wt.

How do you convert 1m cm3 to kg m3?

1 g/cm3 is equal to 1000 kilogram/cubic meter. To convert 100 gram into kg then divide it by 1000 i.e. 100/1000 = 0.1 kg. To convert any value of gm/cm3 into kg/m3 then multiply it by 1000.

How do you convert m3 min to kg S?

Conversion chart – cubic meters per minute to kilograms (water mass) per second

1. cubic meter per minute to kilograms (water mass) per second = 16.67 kg/sec.
2. cubic meters per minute to kilograms (water mass) per second = 33.33 kg/sec.
3. cubic meters per minute to kilograms (water mass) per second = 50.00 kg/sec.

How do I convert meters to kilograms?

Suppose someone ordered me to make 1700 meters fabric with 230gsm and 72″ width then how can I convert it into kg….In the example:

1. Fabric length is 1700 meters.
2. Fabric width = 72 inch convert it into meters = (72 * 2.54) /100 =1.83 meters.
3. Fabric GSM = 230 grams.

What does 1 cubic meter of water weigh?

1000 kg
A cubic metre of pure water at the temperature of maximum density (3.98 °C) and standard atmospheric pressure (101.325 kPa) has a mass of 1000 kg, or one tonne. At 0 °C, the freezing point of water, a cubic metre of water has slightly less mass, 999.972 kilograms.

What is the density of water in kg m3?

approximately 1000 kg/m3
Values for density can vary widely for different fluids. For example, the densities of water and air at 4 C and 1 atm pressure are approximately 1000 kg/m3 (1.94 slug/ft3) and 1.27 kg/m3 (0.00246 slug/ft3), respectively. Densities of liquids are higher than those of gases because the intermolecular spacing is smaller.

What is the conversion factor between kg/m 3 and g/cm 3?

g/cm3↔kg/m3 1 g/cm3 = 1000 kg/m3.

How do you convert m3 min to KG min?

Enter a new cubic meter per minute number to convert How many kilograms (petrol) per minute are in 1 cubic meter per minute? The answer is: 1 m3/min equals 719.70 kg/min.

How many meters go into kilometers?

1,000 meters
How many meters in a kilometer? 1 kilometre is equal to 1,000 meters, which is the conversion factor from kilometres to meters.

How much does a cubic meter of water weight in kg?

How do you convert m3 to kg of water?

1 cubic meter of water (m3 – cu m) = 1,000.00 kilograms of water (kg wt.) Specific cubic meter of water to kilogram of water Conversion Results. Enter a New cubic meter of water Amount to Convert From. * Whole number, decimal or fraction ie: 6, 5.33, 17 3/8.

How do you convert between moles and volume at STP?

To convert between moles and the volume of a gas at STP, we will use the factor label method discussed in the first unit. This conversions relies on the fact that a mole of gas at STP has a volume of 22.4 L. It is important to note, however, that if the conditions of the gas are different this conversion will NOT work.

What is the volume of the gas at STP?

This conversions relies on the fact that a mole of gas at STP has a volume of 22.4 L. It is important to note, however, that if the conditions of the gas are different this conversion will NOT work. Under those conditions you must use the ideal gas law to convert between moles and liters. Let’s try some problems.

What is the density of hydrogen in kg m2?

Hydrogen weighs 8.2 × 10 -5 gram per cubic centimeter or 0.082 kilogram per cubic meter, i.e. density of hydrogen is equal to 0.082 kg/m³; at 0°C (32°F or 273.15K) at standard atmospheric pressure.