How do you fix a PS3 when says the appropriate storage not found?

PS3 Cannot Start the Appropriate Storage Was Not Found

1. A. Clean the Hard Drive. Your best bet is that your hard drive is just a bit dusty or loose.
2. B. Format the Hard Drive.
3. C. Change the Hard Drive.
4. A. Restart the PlayStation.
5. B. Check the Connections.
6. C. Check the Internet.
7. D. Update the Firmware.
8. E. Check the Hard drive.

How do I start my PS3 without a hard drive?

Press and hold the power button on the PS3 it will power on then power off. When it’s off press and hold the power button again until you hear two consecutive beeps. It will ask for the controller to be connected via the USB cable, Turn on the controller and you will have access to the menu.

How do you access system storage on PS3?

Scroll up to the “Game Data Utility” option in the “Game” section of the XMB and press the “X” button. Inside, you can view all of the game data stored on the PS3 hard drive. Press the “Circle” button to return to the main menu once you are finished.

How do you format a PS3 hard drive?

Part 1: How to Format a PS3 HDD on PC or Mac?

1. Simply select the connected PS3 drive from here and click on the “Erase” option from the toolbar on the right.
2. This will open a new pop-up window, letting you format the PS3 hard drive. Simply give it a name, change the format to FAT32, and click on the “Erase” button.

What happens if you restore PS3 system?

When you perform this operation, all data in the system storage will be deleted. Also, the system software will be restored to its default settings. Be careful not to accidentally delete important data as the changes cannot be undone. Data loss or corruption is the responsibility of the user.

How do you soft reset PS3?

You’ll have to do this from the console itself, as your controllers are likely frozen as well. Hold the Power button for about 30 seconds. You’ll hear three rapid beeps and your PS3 will turn itself off. Wait a few seconds, then press the Power button to turn it back on.

How do I restore my PS3 to factory settings?

To restore system software to its default settings:

1. Select Settings, then scroll down and select System Settings.
2. Scroll down and select Restore PS3 System.
3. Select Yes to confirm.
4. Choose either Quick Format or Full Format.
5. Choose Yes on the confirmation.
6. Once done, your PS3 will be returned to factory settings.

How long does it take to restore PS3 system?

How long does this take? Only 2 – 5 minutes. It’s a good thing to do if you’re having any issues with your PS3.

How do you clean a ps3 super slim lens without opening it?

Theres a hidden way to do this.

1. Remove the powercord.
2. Hold the eject button.
3. Connect powercord back to socket without letting go of the eject button.
4. Keep the eject button pressed until the ps3 makes a beeping noice. (
5. The ps3 will start to blow air and sound like a jet engine.
6. Enjoy seeing your ps3 puke out dust.

Why won’t my PS3 play games on my hard drive?

Most likely the hard drive has gone bad. You could try reseating the system storage drive which is located inside a compartment on the side of the PS3. It will require a phillips head plus screwdriver to take out the hard drive secured to the hard drive cage as a screw stops it from being taken out or moved.

How do I replace the hard drive on a PS3?

You could try reseating the system storage drive which is located inside a compartment on the side of the PS3. It will require a phillips head plus screwdriver to take out the hard drive secured to the hard drive cage as a screw stops it from being taken out or moved. Here’s a guide on how to replace the hard drive if it is faulty:

What does PS3 stand for?

The PlayStation 3 (or commonly known as the PS3) is the third home computer entertainment system produced by Sony Computer Entertainment, and the successor to the PlayStation 2. It was released November 11, 2006