Other

Is it okay to put 4GB and 8GB RAM together?

by Author

Is it okay to put 4GB and 8GB RAM together?

Yes, you can use 8GB RAM with 4GB RAM.

Can I put 8GB and 16GB RAM together?

Yes you can, but I wouldn’t recommend it, as the 16GB will be used as 8GB to run dual-channel with the 8GB you likely already have, and the other half will be used as single-channel. It’s also better to have the same type of ram, as to not affect performance via the voltage, controllers and whatnot.

Does increasing RAM size increase performance?

Memory capacity: The more GB your memory module has, the more programs you can have open at once. This amount of memory could handle single applications. If your computer has less than 4 GB of RAM, adding more RAM would greatly improve its performance.

READ:   Which BTS members are the least close?

Which RAM slots should be filled first?

Fill slot 0 (or 1) first, then the other slots sequentially as you add modules. If you are installing memory in a dual-channel memory motherboard, install memory modules in pairs, filling the lowest numbered slots first.

Can you put 2 different RAM sticks together?

There’s a prevailing misconception you cannot use different RAM sizes together or that you cannot mix RAM brands. The answer is Yes, you can mix RAM sticks and RAM sizes and even different RAM speeds—but mixing and matching RAM modules isn’t the best for system performance.

Can I use 2 different RAM sticks?

Can you put 2 RAM sticks next to each other?

Which RAM slots to use for 2 sticks?

In the case of a motherboard with four RAM slots, it’s probable you’ll want to install your first RAM stick into the slot labeled 1. A second stick should go into Slot 2, which isn’t next to Slot 1. If you have a third stick, it would go into Slot 3, which will actually be between Slot 1 and Slot 2.

READ:   What does it mean if someone calls you uppity?

Why is Sdram faster than regular DRAM?

SDRAM vs DRAM This system clock is synchronous with the clock speed of the CPU of a computer (~133 MHz). The reason for this is that it actually allows for much higher clock speeds (3x) than conventional DRAM. All operations to and from the DRAM are executed at the rising edge of a master clock.