What is a 23-gauge pin nailer used for?

Delicate Moldings and Pre-Finished Crown When it comes to delicate moldings or pre-finished trim, pros will often switch to a 23-gauge pin nailer. In these applications, an 18-gauge has the tendency to split the wood, especially hardwoods, or leave unsightly marks.

What gauge is a pin nailer?

23-gauge
Pin nailers get their name from the small, headless, 23-gauge fasteners they shoot. About the same diameter as a sewing needle, these pins are so tiny that they join wood almost invisibly.

What is difference between Brad nailer and pin nailer?

For starters, brad nailers use a much larger 18 gauge nail. This nail has a much larger diameter head, which is why a brad nailer leaves a visible nail hold that must be covered with putty. Pin nailers, on the other hand, use a smaller 23 gauge nail.

Why you need a pin nailer?

Most pin nailers can penetrate the hardest hardwoods with ease. Even though the pins have no heads, they provide surprising holding power. A few pins from a 23-gauge nailer, however, can hold pieces together without a trace. Light pieces of wood are not the only things that are well suited to the pin nailer.

What is a pin nailer good for?

The pins from a pin nailer can add extra support and allow your wood piece to stay together until it has dried. A pin nailer is also a good nail gun for very thin finishing work. Veneers, as well as delicate furniture trim, can be added simply with a pin nailer.

What is the difference between a brad nailer and a pin nailer?

Is a pin nailer worth it?

A pin nailer is also a good nail gun for very thin finishing work. Veneers, as well as delicate furniture trim, can be added simply with a pin nailer. It will not split these fine woods and doesn’t require any wood putty to cover its tracks after.

What are pin nails good for?

Most pin nailers can penetrate the hardest hardwoods with ease. Even though the pins have no heads, they provide surprising holding power. For maximum durability, add a little glue to your pinned joints, using the pins to replace clamps in many situations.

Can you use a pin nailer for quarter round?

For the most part, the best tool for nailing quarter-round is a brad nailer. Plus, because they have heads (unlike the pins shot by 23ga pin nailers), 18ga brads have better holding power and we recommend a quality 18ga brad nailer for quarter round projects over a pin nailer.