What is code for light switch height?

48 inches
Many builders position switch boxes so the bottom of the box is 48 inches above the floor. To satisfy the accessibility requirements of the Fair Housing Act, however, the switch itself should be no more than 48 inches from the floor.

What is the code for light switches?

This states that all light switches must be placed between 15 and 48 inches from the floor to ensure that wheelchair users can reach them. With this in mind, builders tend to work to a standard height by placing the switch plate’s bottom 48 inches above the floor.

How high should outlets be from the floor?

Generally, you want to mount receptacle boxes with the bottom of the box about 16-inches off the floor. Coincidentally, this roughly equates to the same height as your garden variety 22-ounce framing hammer.

Where should light switches go?

Typically, these switches should be placed around four inches above the countertop. Usually, counters reach about 30 inches above the ground, meaning the switch should be placed around 40 inches above the floor. However, the specific height will vary from home to home.

How high should light switches be UK?

1200mm
Sockets need to be installed at least 450mm up from the floor level of a room. TV points, telephone points, doorbells and light switches should be a max height of 1200mm from the floor. Electrical sockets, switches and other electrical control devices should be a minimum of 350mm from corners of a room.

How far should a light switch be from a sink?

Every bathroom must have at least one electrical outlet. It must be a GFCI, and it must be within 3 feet of the edge of the sink. Either behind or beside the sink is acceptable — across from the sink on an opposite wall is not. If the bathroom has two sinks, each must have an electrical receptacle within 3 feet.

How far apart should outlets be?

The US National Electrical Code, Section 210.52, states that there should be an electrical outlet in every kitchen, bedroom, living room, family room, and any other room that has dedicated living space. They must be positioned at least every twelve feet measured along the floor line.

Why do electricians install outlets upside down?

Electricians may position the outlet in an upside-down position so that you can quickly identify the switch-controlled receptacle. Since it stands out visually to most people right away – it provides convenience to the occupants to easily remember which outlet is switch controlled.

Are light switches allowed in bathrooms?

For light switches, plate switches can be used on the inside of the bathroom, but these must be suitable for use in the bathroom, given the high levels of humidity and condensation. And they also must be at least 0.6m away from the bath or shower. A pull cord can be used instead, in any location in the bathroom.

How close to a kitchen sink can a electrical socket be?

30cm horizontally
Electrical sockets or switches should be fitted at a safe distance (it is recommended at least 30cm horizontally) from a sink to avoid the chance of water coming into contact with electricity. Sockets should also be easily accessible.

Are sockets in skirting boards illegal?

Hi, no sockets should be left dangling in the air – it’s dangerous. All sockets, unless replacing current fittings, should be 50cm up the wall.

How close can a light switch be to a toilet?

National Electrical Code says that the receptacle must be within 3′ of the outside edge of the basin, but not more than 12″ below the top of the basin (210.52(D)).

How high above the floor should a light switch be?

For a majority of rooms, builders tend to place the bottoms of light switches 48 inches above the floor. This is a comfortable height for most home dwellers when sitting or standing, plus it makes it easier to install switches during construction.

What is the standard height of an electrical switch box?

The average height for light switches is 46 inches from the floor to the center of the switch box. This is also true for counter-top outlets in the kitchen and bathroom, where switches and outlets are at the same height. Installing Electrical Boxes for Outlets

What is the standard switch position in a light fixture?

The standard switch positions may vary, however, for unique circumstances, such as in a home occupied by people in wheelchairs or with physical limitations. Typically, light fixture wall switches in standard residential construction are set so that wall switch boxes are somewhere between 48 and 52 inches above the floor.

How high should electrical outlets be above the floor?

Mark a line across four studs by running your pencil along the bottom part of the straightedge. Place the receptacles at this height. This gives you a height of 14 inches. If you then lay a floor, thus raising the floor level, you end up with a height of roughly 12 inches above the floor.