What is the multiplier on my electric meter?

The meter multiplier times the change in beginning and ending meter readings is equal to the actual energy use. All the hours of the year other than those that are on-peak. The hours during the year when demand for electricity is particularly high for Midwest Energy.

How is meter multiplier determined?

Meter reading reflects a percentage of the full kWh usage. The actual voltage/current used is often too large to be registered by your meter. This multiplier is determined by the efficiency of your infrastructure.

What is multiplication factor in electricity bill?

It is the factor that is used to multiply the reading of the energy meter to get the actual energy consumption. If the M.F is 10, and the energy meter reading difference (the difference is used because energy meter reading is cumulative) is 45 for a period. The actual energy used for the period is 45×10 = 450 KWH.

How do you calculate an electric kilowatt-hour meter?

Find the “Pres Rdg” at the back of your bill. Go to your electric meter and get the current reading. Subtract this from the “Pres Rdg” from your last bill. The answer will be your current consumption kilowatt-hour (kWh).

How is CT ratio set in energy meter?

For a 200:5A CT, the turns ratio is 40:1, giving the secondary current 1/40th of the primary current. For a 400:5A CT, the turns ratio is 80:1, giving a secondary current of 1/80th of the primary current.

What do you mean by multiplying factor of a Wattmeter?

Multiplication factor of wattmeter is that parameter of virtue that helps us in finding a small scale wattmeter to get the power readings up to multiplication factor times that are multiplied to the smallest scale possible. It is also used in resistive current where its power factor range is from 0.5- 1.

How do you do multiplication factor?

Multiplying two whole numbers gives a product. The numbers that we multiply are the factors of the product. Example: 3 × 5 = 15 therefore, 3 and 5 are the factors of 15.

How do you calculate electric meter?

Always read the dials from the right to the left, starting from Dial A to Dial E. Read the number by the pointer of the dial. When the pointer is between two (2) numbers, the lower number is recorded. To compute your electric consumption, simply subtract the previous reading from the present reading.