How do you revive a dead phone battery?

Place the sealed battery inside the freezer and leave it overnight or at least 12 hours. By exposing the battery to low temperatures such as the inside of a freezer, it allows the battery cells to recharge a little, enough to hold sufficient charge to be connected to a phone charger.

Why is my Motorola phone not turning on and not charging?

If your Moto G will not turn on, the problem may simply be a drained battery. Ensure that you have a working charging cable, and let your phone charge for at least 30 minutes. The phone should reboot by holding down the POWER button after charging.

What do you do when your phone is fully charged but wont turn on?

Troubleshoot with advanced steps

1. Unplug the cable from the power charger.
2. Check that your computer is on and connected to a power source.
3. Connect your phone to your computer’s USB port with the cable that came with your phone.
4. Wait 10–15 minutes.
5. Disconnect and reconnect the cable from your phone within 10 seconds.

What does it mean when your phone won’t turn on at all?

This may sound silly, but it’s possible your phone is just out of battery. Try plugging your phone into a charger—if the battery is truly drained, it won’t necessarily light up right away. Try leaving it plugged in for 15 to 30 minutes or so before turning it on. Try a different cable, power bank, and wall outlet.

How do I force my Motorola phone to turn on?

Force your moto z force to reboot or restart

1. Connect your device to the supplied charger.
2. To reboot the device, press and hold the Power key for 10 – 20 seconds.
3. If this reboot is not successful, press and hold the volume down & power key together for 30-40 seconds.

Why is my phone not turning on but charging?

Cause 4: Faulty battery or charging port If the iPhone still doesn’t turn on, it may have a dead battery or a bad charging port. If the phone says it is charging, then the Lightning connector works, and you likely had a bad battery. But if it still doesn’t charge, you may need to replace the Lightning connector.

How do I reset my Android phone when the screen is black?

Plug in phone, wait five minutes, and then try to do a Force Restart. This ensure the phone has enough power to restart, and restarting could clear any errors that might be affecting the screen. If possible, remove the battery, wait 30 seconds or more, and then reinstall the battery and start your phone.

What should I do if my Moto E Charger is not working?

If you have an alternative charger, you can attempt to use this and see whether the problem continues. If you have ensured that the problem is the charger itself, and not your power supply or Moto E battery, then contact Motorola, or your retailer for a replacement. Some users have reported problems with stuck pixels on their phone screen.

Why does my Moto E turn itself off and on again?

A number of people seem to have experienced random reboots where the Moto E will suddenly turn itself off and on again. Most likely the culprit is an app. Try safe mode. Turn your Moto E off. When the device is off press and hold the Power button to switch it on. After the first vibration, press and hold the Volume up and Volume down buttons.

Why does my Moto E Charger heat up so fast?

A more profound issue is that the charger heats up significantly for many users after just ten minutes of use. First of all, make sure you’re using the cable and charger that were provided with your Moto E. Then, take off the back of your phone and check that the battery is an official Motorola model.

What should I do if my Motorola Moto E SCREEN is stuck?

If you have ensured that the problem is the charger itself, and not your power supply or Moto E battery, then contact Motorola, or your retailer for a replacement. Some users have reported problems with stuck pixels on their phone screen. This typically looks like a dead black dot somewhere on your screen that won’t go away when you change pages.